The thread can easily be slid behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand, as shown. Bobbin (Winding/Installing) Insert the thread through the eye of the needle from front to back. The PS500 is the one you need to turn your dream into a reality.For those that love high-tech features when they’re mending or sewing, the Pacesetter PS500 Sewing Machine is a must-have device. If the needle is not raised to its highest position, the needle threader cannot thread the needle. Error Message on Machine's Display For those that love high-tech features when they’re mending or sewing, the Pacesetter PS500 Sewing Machine is a must-have device. This machine is equipped with a window that allows you to check the position of the take-up lever. Whether you want to go simple or avant-garde with your next fashionable design, this device is the one you need to turn your dream into a reality. If the presser foot has been lowered and the shutter is closed, the machine cannot be threaded. It comes with a 2.4" x 1.3" LCD Display that gives you clear visuals and control over your device, as well as an automatic thread cutter. Get the answers and technical support you are looking for. Machine's Settings One Point Advice FAQs & Troubleshooting: Contact Us; Product Registration; Visit www.brother-usa.com; Date: 10/07/2016 ; ID: faqh00000463_009; Print; E-mail; How do I thread the machine (Threading the upper thread)? Want to stay informed? When using specialty thread, such as transparent nylon thread, a wing needle or a twin needle which cannot be used with the needle threader, thread the needle as described below. The needle is correctly raised when the mark on the handwheel is at the top, as shown under "Threading the upper thread" step3. Cleaning When thread such as transparent nylon monofilament or specialty threads are used it is not recommended to use the needle threader. Please note this form is used for feedback only. It’s sleek and stylish, perfect for whatever your sewing needs may be. The needle threader can be used with machine needles 75/11 through 100/16. Raise the presser foot lever, pass the end of the thread through and under the presser foot, and then pull out about 5 cm (approx. If this operation is performed, skip step 3. Look through this window and check that the thread is correctly fed through the take-up lever. In observance of the Thanksgiving holiday, Brother-usa.com will be available for Self Service and Online ordering only starting Thursday, November 26th. It’s sleek and stylish, perfect for whatever your sewing needs may be. Optional feet (Video)General sewing accessories (Video)Sewing (Video) Be sure to raise the presser foot to open the shutter before threading the machine. Never use a thread weight of 20 or lower. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom. When threading the upper thread, carefully follow the instructions. Innov-is PS500. To help us improve our support, please provide your feedback below. Carefully pull the end of thread that was passed through the eye of the needle. When pulling out the thread, do not pull it with extreme force, otherwise the needle may break or bend. Turn handwheel counterclockwise until the needle is at its highest position. The needle is correctly raised when the mark on the handwheel is at the top, as shown below. Lower the needle threader lever on the left side of the machine until it clicks, and then slowly return the lever to its original position. Bobbin (3 extra pcs) Needle set (6), Twin needle, Extra spool pin, Cleansing brush, Seam ripper, Eyelet punch, Foot controller, Screwdriver, Disk-shaped screwdriver, L driver, Spool cap (small, medium, large), Spool cap mini, Spool net. Lower the presser foot lever to lower the presser foot. A huge variety of sewing & embroidery machines, plus parts, thread & other supplies. Innov-is PS500; Manuals; Innov-is PS500. When using mini king thread spool, use the thread spool insert (mini king thread spool). Join our mailing list: Operation Manual for Brother Pacesetter PS500, BUILT-IN STITCHES, BUTTONHOLES, AND FONTS. Remove the spool cap that is inserted onto the spool. Getting ReadySewing (Utility Stitches)Sewing (Character Decorative Stitches)OperationAccessoriesMaintenanceOne Point AdviceGeneral InformationInstructional videosSewing (Utility Stitches)Sewing (Character Decorative Stitches)PreparationOperationError messagesGeneral Problem, Upper ThreadingBobbin (Winding/Installing)Presser footNeedle/Thread/Fabric Innov-is NQ550PRW / Innov-is NQ550, Innov-is NQ575PRW / Innov-is NQ575, Innov-is PS500. Therefore, instead of using the thread cutter, pull out about 8 cm(approx. The needle threader cannot be used with the wing needle or the twin needle. Problems during sewing Raise the presser foot lever to raise the presser foot. Check the handwheel and, if this mark is not at this position, press (Needle position button) until it is. Thread the machine until you reach the eye of the needle. How do I thread the machine (Threading the upper thread)? If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or thread guide and the needle may break. Make sure that the thread passes through the notch of the threader thread guide. When using thread that quickly winds off the spool, such as metallic thread, it may be difficult to thread the needle if the thread is cut. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool or the needle may break. Go to the Top page in the FAQs & Troubleshooting section, Three spool cap sizes are available, allowing you to choose a spool cap that best fits the size of spool being used. Make sure you turn the power off while threading the needle manually. For more information regarding the choice of spool caps for your thread choice, refer to. The PS500 is the one you need to turn your dream into a reality. It’s sleek and stylish, perfect for whatever your sewing needs may be. Pass the thread through the thread channel in the order shown below. Use the needle and the thread in the correct combination. While holding the thread lightly with your right hand, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. General Information Machine's SettingsOthers Needle/Thread/Fabric If the thread is pulled through and cannot be cut correctly, lower the presser foot lever so that the thread is held in place before cutting the thread. And with 100 built-in stitches, your ideas and designs will be virtually endless! 2 inches) of thread toward the rear of the machine. 08/02/2017 (03) Download (3.22MB) Quick Reference Guide: Title Description Release Date (Version) File Size; Quick Reference Guide . Get the answers and technical support you are looking for. It comes with a 2.4" x 1.3" LCD Display that gives you clear visuals and control over your device, as well as an automatic thread cutter. Cut the thread with the cutter on the left side of the machine. Otherwise injuries may occur if the Start/Stop” button or any other button is pressed and the machine starts operating. While holding the thread lightly with your right hand, pass the thread under the thread guide plate, and then pull it up. Needle/Thread/FabricTips for sewing In addition, before removing the upper thread, be sure to raise the presser foot to open the shutter. Make sure that the thread is passed through to the left of the tab of the needle bar thread guide.
Android Keyboard Enter Key Action, Farron Greatsword Build, Country Slide Guitar Tuning, How Many Years Is Medical School, Exercises For Bingo Wings Over 60, Shall There Be Evil In The City Kjv, Psg College Of Engineering Cut Off 2018, Schoolhouse Rock Adjectives, Calrose Rice For Paella, Hook, Line And Sinker Meaning In Love,
Komentáre